Performance tuning to win!
Have a question or need some help?

786.264.1706

MS3Pro Module F1/F2 Replacement Fuse


SKU No: 0451001.MRL
Description The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose plier
In Stock


Description

The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand.

This is the 1000mA fuse used to protect both the 12V and 5V power supplies on the MS3Pro Module and MS3Pro PNP ECU’s.

Fuses sold individually.

Products FAQ

Where are the fuses located on the MS3-Pro?

  • They are on the top side of the board, near the white connector.

How far do I have to disassemble the MS3-Pro to replace the fuses?

  • You will need to disassemble the case and remove the PCB.

What tools are needed to replace the fuse(s)?

  • Only a #2 phillips bit screwdriver with a good tip.

Why did the fuse blow, anyway?

  • The most likely causes are short circuits on the VREF or stepper IAC control wires.

Recently viewed...


© 2024 Ancla Motorsports. All rights reserved.