Description

MicroSquirt Module is a credit card sized engine management board! This board packs all the features of the MicroSquirt into a 3.5″ x 2.4″ PCB, with all components installed. This tiny ECU opens up unprecedented possibilities – there’s never been a standalone this tiny, or this adaptable. Got a racing series that allows any modification if you can fit in the stock ECU case? No problem! Want to make your own expanded I/O circuit board? Go right ahead – this board already has many of the key features you need for engine management, so simply add your own extra circuits and a connector! The possibilities are limited only by your imagination.

Click here for official documentation.

Here’s a rundown of the features this ECU has to offer.

Inputs:

• IAT and coolant temperature sensors
• Throttle position
• Battery voltage correction
• External MAP sensor
• Crankshaft and camshaft position sensors (Hall, optical, or VR/Magnetic Pickup supported)
• Oxygen sensor (narrow band or wideband w/ external controller)
• 2 general purpose analog inputs for baro correction,  second oxygen sensor, MAF, or knock sensing
• GM flex fuel sensor input

Outputs:

• 2 channel injector outputs – works for 2 low impedance or 8 high impedance injectors
• 2 logic level ignition outputs
• Fuel pump control
• PWM IAC control
• 2 general purpose on/off relay outputs (MS2/Extra 2.1.1 allows use as spark outputs for a total of 4 logic level spark outputs)
• Several unconnected processor pin connections for building your own circuits, including two additional injector outputs

The MicroSquirt Module is based on the V2.0 version of the MicroSquirt, with the high current ignition outputs used on early MicroSquirts removed. Compared to the current production MicroSquirt, it uses a different VR conditioner circuit, and has additional I/O brought out to a 10 pin header.

Product FAQ

Where is this product manufactured?

• This product is manufactured in the USA.

Are large volume discounts available?

• Yes, large quantity discounts are available to qualified businesses. Jobber account required. Please CONTACT US for further info.

How do I connect to the board?

• It uses industry standard 0.100″ headers. We do not recommend soldering wires to it directly as this can make service difficult. We have a hardware kit to make this a bit easier.

Do I need any additional licensing to create and re-sell a system based on this module?

• The licensing for use of the hardware and firmware is included in the cost of the module.
• There are free versions of TunerStudio and MegaLogViewer that include all features needed to fully calibrate an engine management system using the MicroSquirt Module and firmware, as well as registered (pay) versions of this software that add some bonus features and functionality.

Does it include a warranty?

• The module has a one year limited warranty against manufacturing defects. We recommend mounting the module on removable connectors rather than soldering wires straight to the PCB. Even though the need for warranty service is extremely rare, we can only service our PCB, and cannot re-attach the module to soldered on wires after doing doing warranty service which might require their removal.