Performance tuning to win!
Have a question or need some help?

786.264.1706

E888 Expander


SKU No: M E888
DescriptionThe E888 Expander modules are designed to increase the I/O (input/output) capacity of MoTeC products. With CAN connectivity and a number of config
In Stock


Description

The E888 Expander modules are designed to increase the I/O (input/output) capacity of MoTeC products.

With CAN connectivity and a number of configurable inputs and outputs, they provide customers with greater flexibility to add sensors, customise channels and control more auxiliary functions.

The E888 and E816 expander inputs have medium resolution and update rate, where higher update rates or resolution are required consider using the VIM input expander. 

Compatible with

  • SDL3 - only 8 thermocouples on E888

  • ADL3 / EDL3 - up to two E888 or E816

  • ACL - up to two E888 or E816

  • M400, M600M800M880 - one E888 or E816
    Depending on the application, some limitations may apply when using an expander with theseECUs. Please check with your dealer for details.

SPECIFICATIONS

Inputs

    • E888 

      • 8 x analogue voltage inputs, 10 bit (4.9 mV) resolution
        0 to 5 V, suitable for potentiometers, voltage output sensors and variable resistance (temperature) sensors

      • 8 x thermocouple inputs, 1 °C resolution
        suits K type thermocouples (-200 to 1250 °C)

      • 2 x cold junction compensation thermistor inputs

      • 4 x digital inputs with frequency measurement and switched capability

      • 2 x switch inputs

      • Update rate for all inputs 200 Hz, for a second expander 50 Hz

Outputs

  • 8 x PWM outputs
    individually controllable for frequency and duty cycle. 

    • 4 x adjustable duty cycle 0 to 100% in 255 steps and frequency range from 8 Hz to 5 kHz

    • 4 x adjustable duty cycle 0 to 100% in 20 steps and frequency range from 1 Hz to 100 Hz

Communications

  • CAN bus used for communicating to the data acquisition, display or ECU and to the PC during calibration and firmware upgrades

Configuration

Configured as part of the configuration for the connected ECU or data logger.

Physical

  • Case size 99 x 105 x 40 mm

  • Weight

    • E888 310 gram

  • Connectors 

    • E888 two part 60 pin waterproof connector with gold plated contacts

Recently viewed...


© 2024 Ancla Motorsports. All rights reserved.