Performance tuning to win!
Have a question or need some help?

786.264.1706

HSD-4 Channel High Side Driver


SKU No: HSD-4
Description Have an application with a lot of small solenoids that need 12V power and rapid switching? Don’t want the expense of a bank of four separate solid s
In Stock


Description

Have an application with a lot of small solenoids that need 12V power and rapid switching? Don’t want the expense of a bank of four separate solid state relays, each rated for five times the current each solenoid needs? This module lets you run up to four medium current 12 volt devices with high speed solid state switching.

The HSD-4 module provides four high side drivers for solenoids that need 12 volt power instead of ground. Wire a ground triggered output from an MS3Pro, MicroSquirt, or MegaSquirt to the HSD-4’s input, and it will supply a 12 volt output with up to 8 amps of current. Use it for medium current solenoids that have to be switched faster than a mechanical relay. Applications for the HSD-4 high side driver include:

  • Toyota A340 and A341 transmissions
  • Subaru W4A33 transaxles
  • BMW Double VANOS variable valve timing solenoids

Most applications that require an HSD-4 have the solenoid ground connected to the solenoid body and a single wire supplying 12V to the solenoid.

The HSD-4 high side driver is epoxy potted for maximum vibration and water resistance. Suitable for underhood applications.

Product FAQ

Where is this product manufactured?

  • The HSD-4 high side driver is proudly manufactured in Gainesville, Georgia, USA.

How does this wire up to my ECU?

  • We have documentation for using the HSD-4 high side driver with MegaSquirt ECU and TCU products.

Is it possible to use the HSD-4 high side driver module with a brand [enter your brand here] ECU?

  • Probably. Most ground switched outputs will activate the HSD-4.

Can I use the HSD-4 high side driver with nitrous solenoids?

  • Check the coil resistance before wiring this to a nitrous solenoid, as the HSD-4 will not supply more than 8 amps per channel. We do not recommend using the HSD-4 with a solenoid if the coil resistance is under 2 ohms.

Can I trigger two or more outputs with a single input?

  • Yes, you can wire multiple input wires to a single ground triggered output on your ECU if you want the HSD-4 to activate several devices at once.

Recently viewed...


© 2024 Ancla Motorsports. All rights reserved.