Description

The Universal CAN Interface Module for Racepak streams CAN-based data from your MS3Pro, MSPNP, MS3, MS2 or MicroSquirt ECU systems to any Racepak dash display for real time data viewing.

The RacePak dash can read up to 20 data channels from the MS3-Pro. Just plug it into the back of the RacePak dash, and run the two wires to the ECU CANBus wires.

Not required for the IQ3S dash.

Product  FAQ

What firmware do I need to use this?

• • You will need MS2/Extra 3.4.0 or MS3 1.4.0 or later firmware to use this module.

What MegaSquirt products does this module work with?

• • MS3-Pro
  • MSPNP Gen 2
  • MSPNP Pro
  • MicroSquirt
  • MS2 V3.0 or V3.57
  • MS3 V3.0 or V3.57

Do I need to add any modifications to the MegaSquirt to use this?

• • MSPNP, MS3-Pro, and MicroSquirt units do not require any changes other than using the appropriate firmware. If you are using a regular MS2 or MS3, you will need to make sure the CANbus jumpers (JS6 and JS8) are connected.

Can I bring RacePak V-Net data into the ECU using this module?

• • Current firmware does not support this.

What do I need to connect this module to a UDX series dash?

• The UDX has a “bump” on the back that prevents this from plugging V-Net modules into it directly. You’re going to need an extension cable, such as Racepak part 280-CA-VM-006, which installs in between the UDX and this module.

f