Description

This tiny, gauge sized display can show up to eight sensor readings at a time, in the space you’d need for a standard gauge! Plus, this gauge monitors almost all your ECU’s sensor readings, and can interrupt its display to switch to a warning message if you run into an unsafe condition such as overheating, leaning out, and more available warnings. Fits in a standard 52 mm gauge cutout, and measures 70 mm (2 3/4″) outer diameter.

The NEW Perfect Tuning 24x Multicolor OLED Universal Gauge is enclosed in billet aluminum and boasts a real carbon fiber face plate! On-board LUX sensor auto-adjusts for day/ night time viewing.

Out-of-the-box compatible with all of the the following:

• MS3Pro Ultimate, EVO, 1st Gen & MS3Pro Plug & Play
• MegaSquirt 3 (MS3)
• MSPNP Gen 2 & MegaSquirt 2 Universal (MS2) 
• Microsquirt (all versions)

The following data can be displayed from MSPNP Gen 2, MS2 Standalone and Microsquirt:

• MAP (Manifold Air Pressure)
• RPM
• CLT (Coolant temperature)
• TPS
• IAT or MAT (Intake Air temperature)
• Ignition timing
• AFR1 and 2
• AFR Target
• EGO Correction
• EGT1
• Battery voltage
• Generic Sensor 1 and 2
• Knock Retard

And for MS3 / MS3Pro, all the above PLUS

• MAF (Mass air flow)
• Gear
• VSS (Vehicle speed)
• Injector timing
• Cam IN and EX positions
• ECU error code
• Fuel Pressure
• Oil temperature
• Oil pressure
• Speed sensors of each wheel
• Knock on cylinder 1-8
• And more!

The gauge can also be connected to up to 3 sensors with the 3x 0-5v analog inputs and can be used as an expansion board. This means that if there is a sensor connected to the gauge, the ECU can read it over CANBus, display it in TunerStudio and datalog the value (including battery voltage!)

Configure your gauge over a Wi-Fi connection with smartphone, tablet or laptop.

Flying lead type wiring harness and mounting hardware included.

Requires MS2/Extra 3.4.0 or later, or MS3 1.4.0 or later firmware, as this uses the Dash Broadcasting feature.

Product FAQ

• Full colour 1,7″ screen with 160×128 resolution
• 24 full-colour LEDs
• 2 buttons
• 3x protected 0-5v analog inputs
• Display battery voltage
• 1x Digital input
• 1x Digital output
• CANBus communications
• Over 16 configurable alarms
• Configurable with any Wi-Fi equipped devices like smart phones, tablets or laptops. No app needed!
• Auto dimming feature
• Interchangeable carbon faceplate
• One year warranty
• Free lifetime technical support
• 8-18v compatible

Optionnal Compatible sensors (maximum 3 per gauge):

• Any air fuel controller with Bosch LSU 4.9 with automatic calibration
• Temperature sensors for oil, air, coolant and more.
• Pressure sensor for oil, fuel, coolant and more
• MAP sensor up to 44 PSI of boost!
• Exhaust gas temperature (EGT) 1250 Celsius (2200F)
• Flex fuel (coming soon)

Enclosure dimensions:

Compatible with any standard 52 mm (2 1/16″) gauge pod. Overall dimension is 69 mm and 20 mm thick!

One year manufacturer warranty.